Relative Rotation Graphs (“RRG charts”) show you a security's relative strength and momentum relative to a collection of other securities. RRG charts were developed by Julius de Kempenaer and have been available on Bloomberg terminals since 2011.
Note: Both “Relative Rotation Graph™” and “RRG™” are registered trademarks of RRG Research.
RRG charts differ from most other financial charts in that the horizontal axis does not represent time. An RRG chart is a scatter plot with Julius' Relative Strength Ratio indicator as the horizontal axis and his Relative Strength Momentum indicator as the vertical axis.
Here's an example of an RRG chart:
Note that each symbol on an RRG chart is plotted as a dot with a “tail” extending backward. The tail shows you the history of the symbol's position in the past. You can use a slider to control the length of the tail.
Each dot on each symbol's tail represents one period - either one week or one day depending on the “Period” setting. The large dot at the end of the tail represents the current RRG values for that ticker symbol. Those values are updated continually throughout the current trading week; however, new dots are only added at the start of a new week.
There are four quadrants on the RRG chart:
As you can see in the example above, stocks typically progress through the quadrants in a clockwise manner.
The color of each line is determined by the color of the quadrant where the line ends. The width of each line is determined by the ending dot's distance from the center of the plot.
Free users are only able to see a single, fixed RRG chart that consists of the major North American market averages with 3 years of data. Free users can change the chart's ending date, trail length, and scaling, but they are not able to add/remove ticker symbols, view longer range data, or resize the chart.
Members can also create RRG charts from their ChartLists. These RRG charts are limited, however, to the first 50 ticker symbols on the ChartList.
There are multiple ways to create an RRG chart, including:
Members can use the text box at the top of the RRG tool to change the list of symbols used in the chart. Or they can select from one of several predefined symbol groups using the “Groups” dropdown. Up to 50 different ticker symbols can be charted on an RRG chart.
Members can also change the RRG chart's “Benchmark” symbol - the symbol (typically an index like $SPX) that is used in the relative performance calculations. A line chart of the benchmark symbol is always displayed to the right of the RRG chart.
The RRG Chart Tool has several different elements:
Next to the RRG chart is a smaller chart of the benchmark symbol (typically $SPX, the S&P 500 Large Cap Index). You can click anywhere on that graph to change the ending date for the RRG plot. The benchmark chart is meant to give you a sense of what the market as a whole was doing at the time of the RRG plot. In addition to clicking on the benchmark chart, you can also click and drag to manually animate things.
In addition, you can use the left and right arrow keys on your keyboard to change the ending date.
You can also press the “animate” button below the benchmark chart to automatically move the RRG plot through all the available data.
You can use the “Tail Length” slider below the benchmark chart to adjust the length of the tails on the RRG plot. The zone highlighted in blue on the benchmark chart shows the period of time covered by the tails.
You can click on any of the lines in the Symbol Table below the RRG Plot to turn on highlighting for that symbol. Click on the line again to turn off highlighting. Only one line at a time can be highlighted.
You can use the buttons below the benchmark chart to adjust the RRG plot's scaling.
In addition to those buttons, you can also click on the RRG plot itself and drag to change the position of the chart's origin.
Members can change the symbols included in the RRG chart by editing the list in the Symbols box above the chart, then clicking the Update button.
Members can also change the benchmark symbol that the other symbols are compared against. This is done by editing the symbol in the Benchmark box above the chart, then clicking the Update button.
Members can also use the Groups dropdown above the chart to create an RRG chart from a number of different predefined groups.
Members can use the “Years” dropdown above the chart to create longer-term RRG charts. The choices available are 1, 3, 5 and 10-years. Longer duration charts take longer to load.
Note: A ticker symbol must have at least one year's worth of data in order to appear on an RRG chart.
By default, RRG charts use weekly data in their calculations. Members can change the chart so that it uses daily data using the “Periods” dropdown above the chart.
For more details on comparing and interpreting weekly vs. daily RRG charts, see our ChartSchool article on RRG Charts.
Members can click and drag the resize icon in the lower right corner of the RRG chart to change the size of the chart. In addition, you can click the “Maximize” icon in the upper right corner of the chart to expand it to occupy the entire browser window.
Members can click the “Permalink” link located below the symbol table to get a link to their chart that can be bookmarked and/or used in web links.
Members can also use RRG charts to view ChartLists. From the Members Dashboard, you can select “RRG” from the “View As” dropdown next to the ChartList you wish to view. Or you can switch to RRG format from other ChartList formats such as Summary, GalleryView, or CandleGlance. Select “RRG” from the “View List As” dropdown.
The RRG View will display up to 50 symbols from your ChartList in RRG format. Above the chart, you can use the “Select List” dropdown to choose a different ChartList to display.
You can add or edit notes for the entire ChartList by clicking in the ChartList Notes box at the bottom of the screen. Click the Save button once you've made your changes. For more editing functionality, use the Edit List button at the top of the screen to load the ChartList in Edit View.
The Delete List and New List buttons can be used to delete the current ChartList and create a new ChartList, respectively.